FTP (functional threshold power) is the highest power you can hold for about an hour, in watts. You do not test for an hour. You run a shorter test and scale the result. Your bike zones all come from this one number.

Pick a protocol

ProtocolHow it worksFTP =Best for
20-minute testWarm-up, 5 minutes hard, recovery, then 20 minutes all-out steady95% of 20-minute average powerRiders who can pace
Ramp testPower rises every minute until you cannot hold itabout 75% of best 1-minute powerFirst test, indoor apps (Zwift, TrainerRoad)
8-minute testTwo 8-minute efforts with 10 minutes recovery90% of the better 8-minute averageShorter efforts, still needs pacing

The ramp test is easier to get right and harder to sandbag. The 20-minute test reflects endurance better. Pick one and keep it for every retest.

Run the 20-minute test

  1. Rest first. No hard session for 48 hours.
  2. Warm up 20 minutes with three 1-minute fast efforts.
  3. 5 minutes hard, then 10 minutes easy. This clears the early fatigue so the main effort is honest.
  4. 20 minutes. Start at the power you think you can hold, hold it for 10 minutes, then lift it if you can. Empty the tank in the last 3 minutes.
  5. Cool down 10 to 15 minutes.
  6. FTP = average power ร— 0.95.

Most failed tests fail in minute 2: you start 20% too high and fade. A flat or slightly rising power line is the sign of a good test. For a test that went wrong and what the data showed, see I failed my FTP test at 7 minutes.

Set your zones

Zone% of FTPUse
1 Recoveryunder 55%spins, recovery
2 Endurance56 to 75%long rides, base
3 Tempo76 to 90%steady blocks
4 Threshold91 to 105%2 ร— 20 minutes, 3 ร— 12 minutes
5 VO2max106 to 120%3 to 5 minute intervals
6 Anaerobicover 120%short, hard efforts

A worked example: 271 W

A real Zwift result of 271 W gives these zones:

ZoneWatts
1 Recoveryunder 149 W
2 Endurance152 to 203 W
3 Tempo206 to 244 W
4 Threshold247 to 285 W
5 VO2max287 to 325 W
6 Anaerobicover 325 W

A 2 ร— 20 minute threshold session for this rider sits at about 255 to 270 W. A long endurance ride stays under 200 W.

One caution: FTP belongs to the device that measured it. A smart trainer, a gym bike and a pedal power meter can disagree by several percent on the same effort. Retest when you change bikes.

FTP, lactate test, or both?

A home FTP test costs nothing and you can repeat it every 6 weeks. A lab lactate test costs about โ‚ฌ150 to โ‚ฌ310 and tells you more: where your aerobic threshold sits, how fast lactate climbs, and your heart rate at each point. Do the lab test once or twice a year and FTP tests in between. Testing labs are coming to the training map.

When to retest

Every 6 to 8 weeks, at the end of a recovery week, on the same trainer, with the same protocol, at the same time of day.

Sources and limits

  • Allen H, Coggan A. Training and Racing with a Power Meter. 3rd ed. VeloPress, 2019 (20-minute protocol, 95% factor, zone model).
  • Ramp test factor: the published method of the Zwift and TrainerRoad ramp tests (75% of best 1-minute power).
  • Borszcz FK et al. Functional threshold power in cyclists: validity of the concept and physiological responses. Int J Sports Med. 2018. PubMed The 95% rule is accurate on average with wide individual error.